DAB Operation
When you turn on the radio it will automatically
search and store all the available stations. You may
conduct an additional full scan to ensure all stations
are picked up and stored. It is also recommended
every few months to run a new scan to pick up any
new DAB/DAB+ that may have begun broadcasting
after your radio scanned last time.
For initial use, your radio will conduct a full scan and
store stations list in memory. Once the scanning is
completed, the DAB/DAB+ stations will be displayed
in alphanumeric order. The rst station in the list will
be selected.
Make sure the aerial is fully extended before selecting
DAB mode, because your radio will automatically
scan for DAB radio stations. If the aerial is not fully
extended your radio will not tune in properly.
The clock will be updated automatically if you can receive DAB/
FM signal in your location. In order to synchronize to the current
local time, you must leave it on the DAB/FM station for a period
of time.
18
SFPDAB17_IB_170303_will.indd 18 6/3/2017 4:07 PM
To Next Page
Loading...
Need help?
General
