Sandstrom SFPDAB17 User Manual

Auto Scan
The auto scan will search for all DAB Band III channels. After the scan has
nished, the rst alphanumerically found station will be automatically
selected.
1. In ON mode, press MENU button, and then turn the +/–VOLUME/
SELECT dial or press button to select Full scan. Press the +/–
VOLUME/SELECT dial to conrm.
2. The display will show “SCAN…”that indicates the progress of the scan
and the amount of stations that have been found so far.
3. Once the scan has nished, the unit will display the total number of
stations have been found and a list of the found stations. All the stations
that have been found will be stored automatically.
To explore the found stations, turn the +/–VOLUME/SELECT dial or press
button to select a scanned station, and then press the +/–VOLUME/
SELECT dial to conrm.
If you want to remove all the previously scanned stations, system
reset is required.
Manual Tune
This function is for advanced users only. Stations are selected from the
station list.
Manual scan enables you to tune to each multiplex channel, check if a
multiplex is present and measure the signal strength.
1. In ON mode, press MENU button, and then turn the +/–VOLUME/
SELECT dial or press button to select Manual tune. Press the +/–
VOLUME/SELECT dial to conrm.
2. Turn the +/–VOLUME/SELECT dial or press button to select DAB
stations from 5A to 13F. Press the +/–VOLUME/SELECT dial to conrm.
19
SFPDAB17_IB_170303_will.indd 19 6/3/2017 4:07 PM

Sandstrom SFPDAB17 Specifications

General

Brand	Sandstrom
Model	SFPDAB17
Category	Radio
Language	English