Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before
cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or
abrasives.
• Do not spray an aerosol at or near the unit.
Hints and Tips
If a problem occurs, it may often be due to something very minor. The
following table contains various tips:
Problem Solution
No power • Ensure the mains cable is connected
securely.
• Make sure that the unit is switched on.
No Sound • Adjust the volume control, it may not be
turned up.
Static Sound • Signal reception is too low. Adjust the
aerial or move the unit to a stronger
signal location.
Sound is distorted • Volume is too high. Adjust the volume
control.
The unit does not
respond when pressing
any button
• The unit may freeze up during use.
Switch the unit off and then on again at
the mains socket to reset the unit.
28
SFPDAB17_IB_170303_will.indd 28 6/3/2017 4:07 PM
To Next Page
Loading...
Need help?
General
