Problem Solution
Radio
Desired station not
found
• Weak signal. Use the Manual Tune
function.
No coverage in your
area or poor reception
• Adjust the position of the aerial.
The display is blank • This may occur if the broadcaster
changes the label of a service or removes
a label while tuned. The unit will try to
re-tune or perform a scan.
If any functional abnormality is encountered, unplug the unit
from the mains socket and reconnect it again.
29
SFPDAB17_IB_170303_will.indd 29 6/3/2017 4:07 PM
To Next Page
Loading...
