Sandstrom SFPDAB17 User Manual

Scan Setting
In the Scan Settings menu you can choose if you want your radio to tune
to All stations or Strong stations only, and it will try to tune to all stations,
however some may be very weak.
1. In ON mode, press MENU button, and then turn the +/–VOLUME/
SELECT dial or press button to select Scan setting. Press the +/–
VOLUME/SELECT dial to conrm.
2. Turn the +/–VOLUME/SELECT dial or press button to select All
stations or Strong stations. Press the +/–VOLUME/SELECT dial to
conrm.
Audio Setting
If you nd that the station you are listening is not clear, you can select to
listen to it in MONO this can often clear up some of the static.
1. In ON mode, press MENU button, and then turn the +/–VOLUME/
SELECT dial or press button to select Audio setting. Press the
+/–VOLUME/SELECT dial to conrm.
2. Turn the +/–VOLUME/SELECT dial or press button to select
Stereo allowed or Forced mono. Press the +/–VOLUME/SELECT dial
to conrm.
25
SFPDAB17_IB_170303_will.indd 25 6/3/2017 4:07 PM

Sandstrom SFPDAB17 Specifications

General

Brand	Sandstrom
Model	SFPDAB17
Category	Radio
Language	English