EasyManua.ls Logo

Sangean WFT-2D - Network profiles

Sangean WFT-2D
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
72
Network proles
Each time that you connect your radio to a WiFi network, the radio will store the details of that
connection (SSID, security key, DHCP/IP address settings) as a prole. Up to four such proles
are stored in the radio so that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited.
The radio stores the four most recent proles in memory identied by their SSID. Normally the
radio will attempt to connect to one of the stored proles and only if it is unable to do so will you
need to use the Network Wizard.
In the event that you visit a location only once you may wish to delete the prole for the network
in that location to avoid losing other proles.
From the home menu press the Settings mode button. The main settings menu will be
displayed.
Select Network Settings.
Select Network proles and a list of your network proles will be displayed. The network Wizard
can also be accessed from this menu.
Touch the Bin button to delete the unwanted prole.
The radio will display ‘Are you sure?’ Touch Yes the selected prole will be deleted. Touch No if
you do not wish to delete the prole.
Note: that it is not possible to delete a prole which is currently in use.
X
Settings Menu
Time settings
Alarm settings
Equaliser settings Normal
Network settings
15:05
26 Jun 2010
Settings
Network settings
Network wizard
WPS Push button setup…
Network profiles
Manual settings
15:05
26 Jun 2010
Settings

Table of Contents

Related product manuals