Memorizing channels
Automatic memory tuning
Press MENU. The menuscreen will appear.
2
Press 4 or I_ to select
(SETUP) menu, then press A
or V to select "AUTO CH
MEMORY".
Press _ or I_.The TV will begin
memorizing all the channels
available in your area.
To
1
It may take from 15 minutes to
30 minutes to complete
memorizing digital cable
channels.
SETUP
LANGUAGE ENGLISH
TV/CABLE CABLE
ADD/DELETE _'
A_" :SELECT _ :ADJUST
AUTO CH MEMORY
\\ / /
PROGRAMMING NOW
PLEASE WAIT
// / \ _ CABLE
II
EXIT : CANCEL
2
NOTES:
r_
• Memorizing channels is best _,_
accomplished during evening
"PRIMETIME" hours, as more
stations are broadcasting digital
signals. Memorizing channels can
only be accomplished while a
station is broadcasting a digital
to set that channel into 4signal
memory.
• If you are unsure of the digital
channels available in your area you
may visit www.antennaweb.org
to receive a list based on your
address or zip code. Should you
require further assistance you may ___
call our toll-free customer service
line at 1-800-289-0980.
• New digital channels may be added
to your area periodically, it is
recommended to perform the
"AUTO CH MEMORY" procedure
regularly.
• To return from ADD/DELETE menu
to SETUP menu, select "RETURN",
then press 4 or _.
Depending on the reception condition, a BAR display may
not advance for several minutes, please be patient.
ADD/DELETE channels
Press MENU. The menu screen will appear.
or I_ to select
Press
(SETUP) menu, then press A
or V to select "ADD/DELETE".
Press 4 or _.
The ADD/DELETE menu will
appear.
SETUP
LANGUAGE ENGLISH
TV/CABLE CABLE
AUTO CH MEMORY
Press A or V to select "ADD/
DELETE", then press 4 or _.
Select the desired channel
to be memorized or deleted
using A or V.
Press 4 or _ to select "ADD"
or "DELETE", whichever
function you want to perform.
Repeat step 4 for other channels
then press ENTER.
ADD/DELETE
ADDING CHANNEL
_CH SIGNAL
1 ANALOG DELETE
ANALOG ADD
ANALOG DELETE
ANALOG DELETE
ANALOG ADD
5-001 DIGITAL ADD
_LEAR ALL
RETURN
ADD/DELETE
ADDING CHANNEL
ADD/DELETE
_CH SIGNAL
2 ANALOG ADD
ANALOG DELETEANALOG DELETE
5 ANALOG ADD
5-001 DIGITAL ADD
CLEAR ALL
RETURN
_kv :SELECT 4_ :ADJUST
_ou want to add or delete,
Press EXIT to return to the normal screen.
To add a digital channel
Select the channel you wish to add.
Press A or V to select "ADDING CHANNEL" as in step 3 above,
then press 4 or _.
CLEAR ALL
All channels are deleted from the channel memory.
Press A or V to select "CLEAR ALL" as in step 3 above, then
press 4 or _.
19
To Next Page
Loading...
