19
Selecting the video input source/Labeling the video input source
Press MENU. Then press
or to select OPTION
menu.
Press ▲ or ▼ to select
“VIDEO LABEL”.
1
Press or . The VIDEO
LABEL menu will appear.
2
Press ▲ or ▼ to select the
video source you want to
label.
3
Press
or
to select the
desired
label for that input
source.
4
– : Uses the default
label name
VCR :Video cassette
recorder
DVD : DVD video
DTV :
Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device (only HDMI)
Press EXIT to return to the normal screen.
5
Selecting the video input source
P
ress INPUT SELECT to view
a signal from another device
connected to your Plasma
Display, such as a VCR or DVD
player. You can select VIDEO1,
VIDEO2, VIDEO3 (left side of
the unit), COMPONENT1,
COMPONENT2, HDMI, or PC
depending on which input jacks
you used to connect your
devices.
Pressing INPUT SELECT on the remote control displays the current
signal source. To change the video input source, press INPUT
SELECT again or 0-6.
Labeling the video input source
The video label feature allows you to label each input source for
your unit.
3V03001A_En_p17-23 8/23/05, 16:3219
To Next Page
Loading...