Santec PCU-110 - Lan; Connection; Communication Conditions and System Requirements

Polarization Control Unit PCU-110
5-3
5-2 LAN
■
5-2-1 Connection
Connect the LAN cable to the RJ-45 connector on the rear panel.
LAN connector
■
5-2-2 Communication Conditions and System Requirements
Electrical Specications : IEEE802.3 Standard
Transfer Method: Ethernet (100BASE-TX)
Transfer speed: 100Mbps
Communication Protocol : TCP/IP
Connector Type : RJ-45
IP Address : *.*.*.* (* = integer from 0 - 255)
Subnet mask : *.*.*.* (* = integer from 0 - 255)
Default Gateway : *.*.*.* (* = integer from 0 - 255)
DHCP Option Support Port No. : Integer from 0 - 65535