Santec PCU-110 - IEEE488.2 Common Commands -Detailed Description

Polarization Control Unit PCU-110
5-19
1) *IDN? Identication Query
Syntax *IDN?
Description A query to identify the device; places strings of device
information such as the name, rmware, and version in the
output queue.
Parameter None
Response SANTEC,PCU-110,########,****.****
# eld = serial number of the device in 8 digits.
* eld = rmware version as 4 digits + .(period) + 4 digits.
Example *IDN?
→ SANTEC,PCU-110,20090001,0001.0000
2) *RST Device Reset
Syntax *RST
Description Aborts standby operation.
Clears the following items.
・Command input queue
・Error queue
Parameter None
Response None
3) *TST? Self-test Query
Syntax *TST?
Description Initiates an instrument self-test and places the results in the
output queue.
Response 0 (Succeeded)
Other than 0 (Failed)
4) *OPC Operation Complete
Syntax *OPC
Description Generates the OPC message in the Standard Event Status
Register when all pending overlapped operations have been
completed.
Parameter None
Response None
■
5-6-3
IEEE488.2 Common Commands –Detailed Description