EasyManua.ls Logo

Santec PCU-110 - Usb; Connection; Communication Conditions and System Requirements

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-4
PCU-110 Operation Manual
5-3 USB
5-3-1 Connection
Connect PCU-110 and your computer with attempt USB cable (Type B mini).
USB connector
5-3-2 Communication Conditions and System Requirements
USB controller: Mfd. by Future Technology Devices International Ltd.
USB 2.0 compatible
Transfer speed: 1 MBps (with D2XX driver)
Transfer speed: 300 KBps (with VCP driver)
Bulk transmission, Isochronous transfer supported
Transfer FIFO size
Sending FIFO : 384 bytes
Receiving FIFO : 128 bytes
Setting the Delimiter: The delimiter of the command is “CR”.