LPCM
BITSTREAM
DOLBY DIGITAL
MPEG
96kHz LPCM
MAIN MENU
DIGITAL OUT
SETUP
LANGUAGE
DISPLAY
DIGITAL OUT
PARENTAL
TVG
Setting Digital Out
If the COAXIAL (Coaxial digital output) jack is connected to
the amplifier, you must set as follows:
1. Press [SETUP] in the stop mode.
“SETUP” screen appears.
2. Press [5] to select “DIGITAL OUT”.
3. Press [ENT].
“DIGITAL OUT” screen appears.
4. Press [a] to select the submenu.
5. Press [5] or [4] to select “LPCM” or “BITSTREAM”.
6. Press [ENT].
The submenu is set.
-E33-
7. Press [b] to skip back to “DOLBY DIGITAL”.
8. Repeat steps 2 - 7 to set other items (“MPEG” and “96kHz
LPCM” ).
MPEG (Moving Picture Expert Group):
If your amplifier has MPEG2 Decoder, select
“BITSTREAM”. If not, select “LPCM”.
96kHz LPCM (96kHz Liner Pulse Code Modulation):
If your amplifier is available for 96kHz sampling, select
“96kHz LPCM”. If not, select “48kHz LPCM”.
Notes:
• When “48kHz LPCM” is set, 48kHz LPCM audio
signals are provided from the AUDIO OUT jacks,
not 96kHz LPCM audio signals.
• When playing back the DVD video disc which re-
corded with 96kHz LPCM, there is no digital output.
• However playing back the DVD video disc with no
copyright protection, the sound is original recorded
sound.
Need help? Call
1-800-813-3435
9. Press [SETUP] to close the screen.
Note:
To return to the “SETUP” screen, press [5] to select “MAIN
MENU”, and press [ENT].
DOLBY DIGITAL:
If your amplifier has Dolby Digital Decoder, select
“BITSTREAM”. If not, select “LPCM”.
SETUP
ENT
4, a, 5, b
REPEAT A - B ANGLE
TOP MENU RETURN
SETUP MENU
AUDIO SUBTITLE RANDOM ZOOM
PROGRAM
123
6
98
5
4
7
0
+10
ENT
DWM-450-US - English 3/16/05, 3:58 PM34
To Next Page
Loading...
Need help?
General
