Reset the setting to default.
1
Press [SETUP] and use [K / L] to select
“General Setting”, then press [OK].
“General Setting” menu will appear.
2
Use [K / L] to select “Reset All”, then
press [OK].
3
Select “Yes” using [K / L] , then press
[OK].
Reset to factory default?
Yes
No
4
Select “Yes” again using [K / L] , then
press [OK].
Are you sure?
Yes
No
Your setting in recording will be initialized.
Reset All
SETUPS
Note
•
The settings listed below will remain unchanged even
after resetting to the factory default.
– OSD language setting
– Clock setting
– Parental lock setting
– Timer programming information
To Next Page
Loading...
