Sanyo ICR-EH800D - Turning On;Off the Recording LED; Changing the Battery Type

106
Turning on/off the recording LED
You can use this setting to turn on or off the
recording LED for use during recording.
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “COMMON MENU”, and
then press the
/OK button.
3
Press the VOL (+/–) button to
select the “REC LED” setting,
and then press the
/OK
button.
4
Press the VOL (+/–) button to
select “OFF” or “ON”, and then
press the
/OK button.
【RECLED】
ON
OFF
MIC
ST
A
SD
OFF: During recording, the recording LED
does not light.
ON: During recording, the recording LED
lights.
Press the MENU/PLAY LIST button
to exit the menu.
Changing the battery type
Use this setting to specify the type of battery
to use (eneloop battery or alkaline battery).
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “COMMON MENU”, and
then press the
/OK button.
3
Press the VOL (+/–) button to
select the “BATTERY SETTING”
setting, and then press the
/OK button.
4
Press the VOL (+/–) button to
select a battery type, and then
press the
/OK button.
e
A
: eneloop
:ALKALINE
【BATT.SETTING】
eneloop
ALKALINE
MIC
ST
A
SD
Batterysetting
Press the MENU/PLAY LIST button
to exit the menu.
• If the setting does not match the actual
battery in use, the battery indicator will
not be correctly displayed.