Sanyo ICR-EH800D - Editing; Setting or erasing an index mark

5656
Setting or erasing an index mark
When you set an index mark at a desired position in a file, you can quickly skip to that
position during playback.
To skip to the next or previous index mark (page 49)
Setting an index mark
• You cannot set index marks in files stored in the MUSIC (M) folder, LINE (L) folder, and
RECYCLE (
) folder, or when timer recording is in progress.
During recording, recording pause, or
playback, press the FOLDER/INDEX
button to set an index mark at the desired
position.
“INDEX SETTING” appears and the index is set.
• After you set an index mark, recording or
playback will continue and so you can use the
same operation to set another index mark at a
different position.
• Index marks in a file will disappear if you divide
the file.
• You can set a maximum of 36 index marks.
1/36
INDEXSETTING
1/2
FLAT
A
MP3 128k
ST
A
SD
1/36
INDEXSETTING
1/2
FLAT
A
MP3 128k
ST
A
SD
Editing