Sanyo ICR-EH800D - Recording from an external device

44
5
Press the /OK button.
6
Press the MENU/PLAY LIST button.
• During the operation, if you press the STOP/BACK button twice, the recording standby
screen returns.
• The USER mode you just set up is not lost when you turn off the power, or when you turn
off the power and replace the battery power. However, if you replace the battery without
first turning off the power, the setting will be lost.
Recording from an external device
You can use the following procedure to connect a radio cassette player, CD/MD player, or
another external device to the unit for recording music, etc.
1
Connect the audio output terminal of an
external device to the external input (line)/
microphone socket of the unit.
• Use a commercially available audio cable (stereo
mini-plug: 3.5
I
with no resistance).
MIC
A
SD
ST
【RECMENU】
MICSENS.
MICMODE
LOWCUTFILTER
RECEQ
MIC
A
SD
ST
【RECMENU】
MICSENS.
MICMODE
LOWCUTFILTER
RECEQ
STANDBY
A001
PCM
15
44.1K
MIC
PCM
A
SD
ST
10
45
1
m
h
s
STANDBY
A001
PCM
15
44.1K
MIC
PCM
A
SD
ST
10
45
1
m
h
s
Toexternal
input(line)/
microphone
socket
Audiodevice
Toaudio
output
headphones
terminal
Orto
LINEOUT
(audio
output)
terminal
L R
Toexternal
input(line)/
microphone
socket
Audiodevice
Toaudio
output
headphones
terminal
Orto
LINEOUT
(audio
output)
terminal
L R