Sanyo ICR-EH800D - Page 43

43
2
Press the VOL (–) button.
3
Press the / button to select a
frequency band you want to change.
• The following frequency bands are available:
150Hz, 500Hz, 1kHz, 4kHz, and 12kHz.
4
Press the VOL (+/–) button to change the
level of the selected frequency band.
You can change the level from -12dB to 12dB (25
increments), with each increment being 1dB. The
larger the dB number, the stronger it becomes.
• Pressing the VOL (+) button increases the level.
• Pressing the VOL (–) button decreases the level.
• To modify another frequency band, repeat steps
3
and
4
.
• While making changes, if you want to cancel the
operation, press the STOP/BACK button. The
screen in step
1
returns.
USER
MIC
A
SD
ST
USER
MIC
A
SD
ST
USER
MIC
A
SD
ST
USER
MIC
A
SD
ST
USER
MIC
A
SD
ST
USER
MIC
A
SD
ST