Sanyo ICR-EH800D - Setting the low cut filter; Setting the peak limiter

91
Setting the low cut filter
The low cut filter reduces low frequency
sound to enable you to obtain clear
recording. This is helpful when you want
to filter out unwanted sound, such as air
conditioning, when recording a meeting.
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “REC MENU”, and then
press the
/OK button.
3
Press the VOL (+/–) button to
select the “LOW CUT FILTER”
setting, and then press the
/OK button.
4
Press the VOL (+/–) button to
select “OFF” or “ON”, and then
press the
/OK button.
RECREMAINTIME
【LOWCUTFILTER】
ON
OFF
00
25
0
45
16
m
h
s
m s
LC
1/2
FLAT
A
MP3 128k
MIC
ST
A
SD
MIC
ST
A
SD
Lowcutfilterindicator
Press the MENU/PLAY LIST button
to exit the menu.
• When you turn on the “LOW CUT FILTER”
setting, its icon appears on the screen.
Setting the peak limiter
This setting automatically adjusts for any
sudden, excessive input. This allows you
to suppress any sound distortion while
recording.
• This setting is valid only when the “MIC
ALC” setting is “OFF”.
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “REC MENU”, and then
press the
/OK button.
3
Press the VOL (+/–) button to
select the “PEAK LIMITER”
setting, and then press the
/OK button.
4
Press the VOL (+/–) button to
select “OFF” or “ON”, and then
press the
/OK button.
ON
OFF
MIC
ST
A
SD
【PEAKLIMITER】
＊OKONLYWHEN
 MICALCISOFF
Press the MENU/PLAY LIST button
to exit the menu.