Sanyo ICR-EH800D - Changing the microphone sensitivity

88
Changing the microphone sensitivity
You can change the microphone sensitivity
according to the recording situation. Change
the microphone sensitivity if you find
recorded sound too small or too large.
1
Turn on the power. From the
basic screen, press the MENU/
PLAY LIST button.
2
Press the VOL (+/–) button to
select “REC MENU”, and then
press the
/OK button.
3
Press the VOL (+/–) button to
select the “MIC SENS.” setting,
and then press the
/OK
button.
4
Press the VOL (+/–) button to
select “HIGH” or “LOW”, and
then press the
/OK button.
【MICSENS.】
LOW
HIGH
MIC
ST
A
SD
HIGH: Select this value if recorded sound is
too small.
LOW: Select this value if recorded sound is
too large.
Press the MENU/PLAY LIST button
to exit the menu.
• When the “MIC SENS.” setting changes,
its icon on the screen also changes.
FLAT
MP3 128k
MIC
ST
A
SD
RECREMAINTIME
00
25
0
45
16
m
h
s
m s
MIC SENS.
STEREO
STEREO WIDE
ZOOM
HIGH
LOW
• The “MIC SENS.” setting is valid only
during microphone recording.