Sanyo ICR-EH800D - Using the USB Terminal

13
Using the USB terminal
Slide out the USB terminal from the unit when connecting to your PC or a USB AC adapter.
To slide out the USB terminal
1
Slide the USB terminal slide switch in the
direction of the arrow to open the USB
terminal cover.
While slightly pressing down the lever, slide the
switch until it clicks.
To slide the USB terminal back into the unit
1
Slide the USB terminal slide switch in the
direction of the arrow.
While slightly pressing down the lever, slide the
switch until it clicks.
2
Close the USB terminal cover.
• When not using the USB terminal, always close
the cover.

