Sanyo ICR-EH800D - Recording

35
Recording
This section describes how to use the built-in microphone for recording.
If the “SCENE SELECT” setting is set to “MUSIC” or the “MIC ALC” setting is “OFF”, you can
manually adjust the recording level according to the content of recording or the sound level.
1
Turn on the power.
Turning on the power (page 22)
2
Select a folder for recordings.
Selecting a folder (page 17)
3
Select a recording scene.
Selecting a recording scene (page 33)
• If the “SCENE SELECT” setting is set to “MUSIC”
or the “MIC ALC” setting is “OFF”, proceed to
step
4
to adjust the recording level.
(If a number appears on the top right side of the
screen, this means “MIC ALC” is “OFF”.)
• If the “SCENE SELECT” setting is not set to
“MUSIC” or the “MIC ALC” setting is “ON”, you
don’t need to adjust the recording level. Instead,
skip to step
5
.
ST
MP3 128k
【ＯＦＦ】
MIC
A
SD
ST
MP3 128k
【ＯＦＦ】
MIC
A
SD
15
44.1K
MIC
PCM
A
SD
【MUSIC】
ST
ST
64k
MP3
LC
MIC
A
SD
【INTERVIEW】
ALCOFF
ALCON
Recording
level
displayed
Recording
levelnot
displayed
15
44.1K
MIC
PCM
A
SD
【MUSIC】
ST
ST
64k
MP3
LC
MIC
A
SD
【INTERVIEW】
ALCOFF
ALCON
Recording
level
displayed
Recording
levelnot
displayed