Sanyo ICR-EH800D - Using the recording menu (REC MENU); Changing the recording mode

87
Changing the recording mode
You can change the sound quality for
microphone recording or line-in recording.
This allows you to provide the best sound
quality for the particular purpose.
1
Turn on the power. From the
basic screen, press the MENU/
PLAY LIST button.
2
Press the VOL (+/–) button to
select “REC MENU”, and then
press the
/OK button.
3
Press the VOL (+/–) button to
select “REC MODE”, and then
press the
/OK button.
4
Press the VOL (+/–) button
or
/ button to select a
recording mode, and then press
the
/OK button.
<128kbps44.1kHz>
【RECMODE】
32012832
19264
44.1
MP3
PCM
ST
A
PCM 44.1kHz
High quality
recording
È
MP3
320kHz
192kbps
128kbps
Standard
sound quality
64kbps
Ç
Long
recording
32kbps
• PCM uses non-compression in recording of
all audio data while MP3 uses compression
in recording. If you increase the sound
quality, this will also increase the data size,
thus reducing the possible recording time.
Therefore, consider whether sound quality
or possible recording time should take
priority, and then select the appropriate
recording mode.
Recording mode and possible
recording time (page 133)
Press the MENU/PLAY LIST button
to exit the menu.
• The selected recording mode appears on
the screen.
RECREMAINTIME
00
25
0
45
16
m
h
s
m s
1/1
FLAT
A
MP3 128k
MIC
ST
A
SD
If128kbps
isselected
Using the recording menu (REC MENU)