Sanyo PDG-DHT8000L Service Manual

Multimedia Projector
SERVICE MANUAL
PRODUCT CODE
1 122 533 20 (KE2AL)
1 122 533 24 (KE2EL)
1 122 535 20 (LE2AL)
1 122 535 22 (LE2CL)
1 122 535 23 (LE2DL)
Original Version
REFERENCE NO. SM5111276-00
FILE NO.
Model No. PDG-DHT8000L
U.S.A, Canada, Europe
U.K, Asia, Brazil
* Projection lens is optional.
Chassis No. KE2-DHT8000L00
Match the Chassis No. on the unit's back cover with the
Chassis No. in the Service Manual.
If the Original Version Service Manual Chassis No. does
not match the unit’s, additional Service Literature is re-
quired. You must refer to “Notices” to the Original Service
Manual prior to servicing the unit.

Sanyo PDG-DHT8000L Specifications

General

Heat dissipation	3286 BTU/h
Projection distance	- m
Projection technology	DLP
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Resolution	2073600 pixels
Aspect ratio	16:9
RS-232 ports	1
Dimensions (WxDxH)	398.78 x 523.24 x 241.3 mm
Power requirements	100 - 240V
Focal length range	- mm
Lamp type	UHP
Lamp power	330 W
Light source type	Lamp
Service life of light source	- h
Service life of light source (economic mode)	3000 h
Noise level	35 dB
Dot clock scanning frequency	230 MHz
Built-in speaker(s)	No
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)	- W
Power consumption (typical)	963 W
Display diagonal	0.95 \
Placement	Ceiling

Weight and Dimensions

Weight	19595.19 g