Sanyo PDG-DHT8000L - Lens Holder and Optical Unit Assy Removal

-28-
Mechanical Disassembly
8 Lens holder and Optical unit assy removal
1 Remove 4 screws-A (T4x10) and 1 screw-B (T4x10) and take the Lens holder assy
and Optical unit assy off.
2 Remove 2 screws-C (M4x8) and take the optical unit assy from the Lens holder
assy.
A
A
A
A
C
C
B
(M3x6)x2
(M3x6)x2
(M3x6)x2
(M3x6)x4
(M3x6)x2
(M3x6)x3
Motor-Y
Motor-X
Lens Shift-Y
board
Lens Shift-X
board
(M3x6)x2
Spring
Spring
Spring
holder
Arm lens
lock-X
Arm lens
lock-Z
Lens mount
(M3x10)x6
Lens holder
Lens
cover
Screw lens
cover
Optical unit assy
Lens holder assy