-26-
Mechanical Disassembly
6-1 Optical base assy disassembly
1 Remove 3 screws-A (M3x10) and take the Optical base rod top off.
A
A
Prism (Rod)-L
Prism (Rod)-S
Color wheel socket
Color wheel socket
A
Optical base rod top
(M3x6)x4
Optical base rod bottom
Prism (Rod)-S
Prism (Rod)-L
Top view
Mount the
prisms rods
as shown in
the figure. No
gap between
the rod and
the optical
base rod top.
(M3x12)x2
(M3x12)x2
Guide
Guide
Optical base rod duct
(M3x6)x4
Mirror tunnel
Note: As the optical components (Mirror tunnel, Prism
Rod) are very sensitive, never touch or wipe the glass
or mirror surface. If there are some dust particles on the
surface, use the air spray to remove them.
To Next Page
Loading...
