Sanyo PLC-ET30L - Page 44

-44-
Optical Parts Disassembly
28-2
Optical base top removal-2.
1. Remove 3 screws-A(T3X10) and remove the optical base top.
28-3
Optical base top removal-3.
1. Remove 2 screws-A(T3X10) and remove the Fan(FN903) ass'y.
2. Unhook 2 hooks and pull out the Shield plate.
Fig.28b
Optical base top
A
Fig.28c
Fan(FN903) ass'y
Hook
Shield plate
A A
A
A