Sanyo PLC-XF47 - Page 42

- 42 -
A
A
A
12-3
Optical filters and Polarized glasses disassemblies.
1. Remove 3 screws-A and remove the stoppers.
2. Remove the plate.
3. Remove the polarized glasses and Prepolarized grasses upward.
Note:
Each polarized glasses use different characteristic polarization glasses. Mark the polarizer units as they are
removed from the optical unit so that they may be reassembled in the same location from which they were
removed.
Prepolarized glass (out)
(Film side)
Optical Unit disassemblies
Prepolarized glass (out)
(Glass side)
Prepolarized glass (out)
(Film side)
Polarized glass (out)
(Glass side)
Polarized glass (out)
(Flm side)
Plate
Polarized glass (out)
(Glass side)
Stopper
Stopper
Stopper
Film side
Film side
Film side
Green
Red
Blue