Sanyo PLC-XF47 - Logo Customization and Security Features

- 48 -
A
A
A
A
B
B
B
B
C
D
E
E
F
F
F
F
17-1
Mirror units removal and disassemblies.
1. Remove 4 screws-A and remove the Mirror units.
2. Remove 4 screws-B and remove the Stoppers (C).
3. Remove screw-C and remove the Stopper (E).
4. Remove screw-D and remove the Stopper (D).
5. Remove 2 screws-E and remove the Stoppers (B).
6. Remove 4 screws-F and remove the Stoppers (A).
Mirror units are same as.
Note : Do not touch mirrors surface directly with hand.
Mirror unit
Optical Unit disassemblies
Mirror unit
Stopper (A)
Stopper (D)
Stopper (A)
Stopper (C)
Stopper (C)
Holder
Mirror
Mirror
Stopper (B)
Stopper (E)
Stopper (B)
The printedmarker comes holder side.