- 49 -
17-2
Optical Filter units removal and disassemblies.
1. Remove 2 screws-A and remove the Optical filter unit 1.
2. Remove screw-E, remove the plate and remove the Optical filter upward.
3. Remove 2 screws-B and remove the Optical filter unit 2.
4. Remove screw-F, remove the plate and remove the Optical filter upward.
5. Remove 2 screws-C and remove the Optical filter unit 3.
6. Remove screw-G, remove the plate and remove the Optical filter upward.
7. Remove 2 screws-D and remove the Optical filter unit 4.
8. Remove screw-H, remove the plate and remove the Optical filter upward.
Note : Do not touch optical filters surface directly with hand.
Each mirror uses different characteristic optical filter glasses. Mark the mirrors as they are removed from the opti-
cal unit so that they may be reassembled in the location and direction from which they were removed.
Plate
Printed marker
cimes this side
surface.
Optical Unit disassemblies
Printed marker
cimes this side
surface.
Printed marker
cimes this side
surface.
Plate
Plate
Plate
Holder
Holder
Holder
Printed marker
cimes this side
surface.
Holder
Optical filter
Optical filter
Optical filter
Optical filter
Optical filter unit 2
Optical filter unit 1
Optical filter unit 4
Optical filter unit 3
To Next Page
Loading...
