Sanyo PLC-XM100L Service Manual

A1
KA8-XM15000 / KA8-XM150L00
KZ5-XM10000 / KZ5-XM100L00
Schematic Diagrams
Printed Wiring Board Drawings
Model Chassis No.
PLC-XM150 KA8-XM15000
PLC-XM150L KA8-XM150L00
PLC-XM100 KZ5-XM10000
PLC-XM100L KZ5-XM100L00
Diagrams & Drawings
These schematic diagrams and printed wiring board drawings are part of the
service manual original for chassis No. KA8-XM15000 / KA8-XM150L00 / KZ5-
XM10000 / KZ5-XM100L00 models PLC-XM150/ PLC-XM150L / PLC-XM100 /
PLC-XM100L.
File with the service manual No. SM5111174-00
Note:
All the information of part numbers and values indicated on these diagrams are at the
beginning of production. To improve the performance, there may be some differences to
the actual set. When you order the service parts, use service parts code mentioned on the
parts list in this service manual.

Sanyo PLC-XM100L Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Analog signal format system	NTSC, PAL, SECAM
S-Video inputs quantity	1
Dimensions (WxDxH)	489.5 x 371.1 x 164 mm
Noise level	38 dB
Power consumption (standby)	0.6 W
Power consumption (typical)	400 W
Power consumption (economy mode)	338 W

Weight and Dimensions

Weight	8900 g