Sanyo plc-xu4001 - Power Control and Status Monitoring

34
Chapter 4 Controlling the Projector
Power control and status check
Click Power & Status on the main menu. The control page will be dis-
played.
By clicking ON or Standby button on the page, the power of the projector can be con-
trolled.
Item Description
PJ status
Power .........................Displays the status of the lamp. (ON, OFF, On starting up, On cooling down,
Service in need)
Status ..........................Displays the status of the projector's power. (Refer to next page.)
Power control........Controls the projector power by clicking the "ON" or "Standby" button.
Popup confirmation window
 The projector cannot be turned on while the projector is on cooling down.
 The web browser checks and updates the projector's condition every 30 seconds automatically.
Confirmation window as shown
in the below appears when the
Standby button is pressed.