44
Chapter 4 Controlling the Projector
Information
This page is to display the basic information of the projector status. Click
Information on the main menu.
Items Description
Input............................................Displays selected input and source.
System.......................................Displays selected signal system.
Signal..........................................Input signal status (Yes, No)
Screen ........................................Displays screen mode.
Lamp status
.............................Displays lamp status with an icon. Refer to the table on the next page.
Security .....................................
Displays the security (PIN code lock) status (Yes, No)
PJ time(h) .................................
Displays the accumulated use time of the projector.
Lamp Corres. Value(h).....Displays the use time (Corresponding value) of the lamp.
Filter time(h)..........................
Displays the accumulated use time of the filter.
Total power savings .........Displays the total accumulated power savings and the total amount of
exhausted CO2 from the projector.
Click this button to
update the information.
Network
Items Description
MAC address..........................Displays MAC address of the projector.
IP address ................................Displays the IP address of the projector.
Information
To Next Page
Loading...
Need help?
General
