42
Chapter 4 Controlling the Projector
Item Description
Terminal.................Sets the COMPUTER IN 2/MONITOR OUT
terminal. (Computer2, Monitor out)
Picture in picture (PLC-WU3001 Only)
......................................Select the picture in picture mode.(P
in P, P by P, OFF)
Power
management.....Sets into the selected power manage-
ment mode (Ready, Shut down, OFF) if
the input signal is interrupted and no
control key is pressed for the specified period of time.
*The specified time can be set 1 t
o 30 min.
Direct on................Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF)
Lamp control......Selects lamp control mode. (Auto, Normal, Eco1, Eco2)
Lamp life control
...Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
the recommended total hours of use.
Setting 1
Setting 2
Item Description
Language..............Sets the language display of projector's
on-screen display menu.
Auto setup...........Executes the Auto PC Adj., and Input
Search function below according to the
each setting after clicking
Start button.
Input search .....Sets the auto-input signal detection
mode. (ON1, ON2, OFF)
Auto PC Adj. .....Sets Auto PC Adjustment mode. (ON,
OFF)
Auto keystone....
Sets Auto Keystone mode. (Auto, Manual,
OFF)
Background.........Sets the screen background when no signal input. (Blue, User, Black)
Display....................Switches on or off the on-screen menu display on the screen. (OFF, Countdown off,
ON)
Countdown off .......Displays image during the starting up.
Logo .........................Sets on or off the logo display on the screen during the startup. (OFF, Default, User)
To Next Page
Loading...
Need help?
General
