Sanyo plc-xu4001 - Page 19

19
Basic Operation
:KDWLV3,1FRGH"
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting a PIN code
prevents unauthorized use of the projector.
A PIN code consists of a four-digit number.
Refer to the PIN code lock function in the Setting
Menu on pages 55-56 for locking operation of
the projector with your PIN code.
(QWHUD3,1FRGH
Use the Point Ÿź buttons to enter a number.
Press the Point Ź button to fix the number and
move the red frame pointer to the next box. The
number changes to ¼. If you fixed an incorrect
number, use the Point Ż button to move the
pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to “Set”. Press the SELECT button so
that you can start to operate the projector.
If you entered an incorrect PIN code, 3,1FRGH
and the number (¼¼¼¼) will turn red for a
moment. Enter the correct PIN code all over
again.
After the OK icon disappears,
you can operate the projector.
3,1&RGH,QSXW'LDORJ%R[
31RWH
,IWKH3,1FRGHQXPEHULVQRWHQWHUHGRUZURQJ3,1
code number is entered within three minutes after
the PIN code dialog box appeared, the projector will
be turned off automatically.
7KH ³´ LV VHW DV WKH LQLWLDO 3,1 FRGH DW WKH
factory.
&$87,2121+$1'/,1*3,1&2'(
If you forget your PIN code, the projector
can no longer be started. Take a special
care in setting a new PIN code, write down
the number in a column on page 78 of this
manual and keep it on hand. Should the
PIN code be missing or forgotten, consult
your dealer or service center.