43
9LGHR,QSXW
.H\VWRQH
This function is used to adjust keystone
distortion of the projected image. Use the Point
Ÿź buttons to choose the item you want to
adjust.
.H\VWRQH
To correct keystone distortion, press the
SELECT button.
Keystone appears on the screen. Use the
Point Ÿź buttons to correct keystone
distortion (p. 23).
Store
To store or reset the keystone correction,
press the Point Ź button.
Store ..........Keep the keystone correction
even when the AC power cord is
unplugged.
5HVHW..........Release the keystone correction
when the AC power cord is
unplugged.
.H\VWRQH
Ceiling
5HDU
When this function is set to On, the picture
will be top/bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
5HDU
To reset the adjusted data, select 5HVHW and
press the SELECT button. A confirmation box
appears and then select <HV. All adjustments
will return to their previous figures.
5HVHW
6FUHHQDVSHFW3/&:82QO\
This function is used to project the image to a
4:3 or 16:9 projection screen.
'HIDXOW
....
16:10 is the aspect of the
LCD panel. The original
Screen Menu is available.
......Set to a 16:9 projection
screen.
.
.....
Set to a 4:3 projection
screen.
31RWH
When the 16:9 function is selected on Screen
aspect menu, Wide (16:9) is not available in the PC
and AV screen (pp.34, 42). (for PLC-WU3001)
To Next Page
Loading...
Need help?
General
