75
$SSHQGL[
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and
Information System Industries Association). This projector supports all commands defined by PJLink
Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the owner’s manual of “Network Set-up and Operation.”
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
3-/LQN1RWLFH
$WWDFKLQJWKH)LOWHU&RYHUWRWKH3URMHFWRU
The supplied filter cover is designed for
preventing dust accumulation on the filter when
mounting the projector on the ceiling.
7R&HLOLQJ0RXQW
For attaching the filter cover to the projector,
push the cover as the picture shown. (For
removing the filter cover, push the cover to
the opposite direction.)
Turn over the projector.
1
3
Attach the projector to the ceiling mount in
accordance with the instruction manuals
which come with the ceiling mount.
4
2
Before attaching the filter cover to the
projector, removing the filter cover (bottom)
first. See page 61 for removing.
3 1RWH
Please keep the filter cover (bottom) for later use.
Projector Input PJLink Input Parameter
Computer 2 (Analog) RGB 3 13
Computer 1
RGB RGB 1 11
Component VIDEO 2 22
RGB (Scart) RGB 2 12
HDMI DIGITAL 3 33
Video
Video VIDEO 1 21
S-video VIDEO 5 25
K
Filter
Cover
(supplied)
Projector
To Next Page
Loading...
Need help?
General
