10
Part Names and Functions
q w
e
t u i
o
Top Control
r y
u LAMP REPLACE indicator
Turn yellow when the life of the projection
lamp draws to an end. (p.54, 60)
yWARNING indicator
Emit a red light when the projector detects
an abnormal condition. This also blinks
red when the internal temperature of the
projector exceeds the operating range.
(p.51, 60)
w POWER ON–OFF button
Turn the projector on or off. (p.18, 19)
r POWER indicator
Emit a red light until the projector gets
ready to be turned on. It turns red when
the projector is in the stand-by mode. It
remains green while the projector is under
operation. (p.18, 19, 60)
tINPUT button
Select input source. (p.25, 34, 35)
eMENU button
Open or close the On-Screen Menu. (p.20)
o POINT (ed7 8) buttons
– Select an item or adjust the value in the
On-Screen Menu. (p.20)
– Pan the image in Digital zoom + mode.
(p.33)
– Adjust th e volume level. (P oint 7 8
buttons) (p.23)
q SELECT button
– Execute the selected item. (p.20)
– Expand or compress the image in Digital
zoom mode. (p.33)
i KEYSTONE button
Correct the keystone distortion. (p.22, 41)
To Next Page
Loading...
