Basic Operation
22
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the projected picture
focus.
Zoom and Focus Adjustment
Zoom Ring
(Rear)
Focus Ring
(Front)
If a projected picture has keystone distortion, correct
the image with Keystone adjustment.
Press the KEYSTONE button on the top control or on
the remote control. The keystone dialog box appears.
Correct keystone distortion by pressing the Point ed
buttons. Keystone adjustment can be memorized.
(p.41)
Reduce the upper width
with Point e button.
Reduce the lower width
with Point d button.
Keystone Correction
• The arrows are white when there is no
correction.
• The direction of the arrow being corrected
turns red.
• The arrows disappear at the maximum
correction.
• If you press the KEYSTONE button on the
top control or on the remote control once
more while the keystone dialog box is
being displayed, the keystone adjustment
is canceled.
Remote Control
Top Control
KEYSTONE button
KEYSTONE button
POINT ed buttons
POINT ed buttons
To Next Page
Loading...
