10
Part Names and Functions
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.
q DVI-I RGB/COMPONENT
Connect computer output (Digital/Analog DVI-I type),
component video output, or RGB Scart 21-Pin video output to
this terminal. (p16, 17)
Terminal
q w
e t
e
VIDEO
Connect the composite video output from video equipment to
this jack. (p16)
r Y - Pb/Cb - Pr/Cr
Connect the component video output to these jacks. (p16)
t S-VIDEO
Connect the S-Video output from video equipment to this jack.
(p16)
w SERVICE PORT
This jack is used to service this projector.
*
*
r
To Next Page
Loading...
