Sanyo PLV-Z2 - On-Screen Menu

21
Basic Operation
Press the MENU button to display the On-Screen Menu
(Main Menu).
Select a menu from the main menu by pressing the Point
Up/Down button, and press the Point Right button to enter
the sub-menu. (The selected icon turns yellow.)
Press the MENU button to close the On-Screen Menu when
you are selecting a main menu. When you are selecting a
sub-menu, press the MENU button twice.
Select an item by pressing the Point Up/Down button, and
activate the item that you have selected with the
(SELECT), (Point Left),
or
(Point Right) button.
1
2
4
3
You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
LAMP
REPLACE
MENU
INPUT
SELECT
Top Control
Point
Right
button
Item
SELECT button
POINT button
Remote Control
MENU button
On-Screen Menu
MENU button
SELECT button
POINT button
On-Screen Menu (Main Menu)
NOTE
● If you are selecting a sub-menu or an item displayed in a line, pressing
the MENU button takes you back to the previous On-Screen Menu.
● The On-Screen Menu disappears by holding down the MENU button
longer whatever you are selecting.
On-Screen Menu (Sub-Menu)