Sanyo PLV-Z2 - Image Level Selection

36
Computer Input
This check shows the level
being selected.
Normal picture level preset on this projector.
Standard
Picture level with improved halftone for graphics.
Real
User preset image in the Image Adjust Menu (p37).
IMAGE 1~4
Select an image level among Standard, Real (P-IM), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE buttons (STANDARD
(STD), PRESET IMAGE (P-IM), and 1-4 buttons) on the remote control.
Normal picture level preset on this projector.
Picture level with improved halftone for graphics.
User preset image in the Image Adjust Menu (p37).
Standard (STD)
Real [PRESET IMAGE (P-IM)]
IMAGE 1~4
Image Level Selection
Direct Operation
Menu Operation
Image Select MenuSelect the Image Select Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
1
2
Choose the level that you want to select with the Point
Up/Down button and then press the SELECT button.
Remote Control
IMAGE buttons