To p
q w e r
t y u
i
i INPUT button
Selects input source. (p23, 31)
t MENU button
Opens or closes the On-Screen Menu. (p21)
e WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p42)
w
POWER indicator
Flashes red until the projector gets ready to be turned on or
when the front cover is closed. It lights red when the projector
is in the stand-by mode. It remains green while the projector is
under operation.
y POINT (Upe/Downd/Left7/Right8) button
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom mode. (p38)
u SELECT button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom mode. (p38)
r LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p45)
q POWER ON–OFF button
Turns the projector on or off. (p18)
To Next Page
Loading...
