Using the Voice Services of Your Sprint PCS Phone 133
14 14
Understanding
Roaming
14
Voice Services
14 14
Recording your Name
You can add your name to the pre-recorded announcement.
Follow these steps:
1.
From the Standby mode, press , highlight
Screen Call
and press .
2.
Highlight
Announcement
, and press .
3.
Highlight
Pre-recorded
.
4.
Press .
5.
Highlight
Record Name
.
6.
Press .
7.
Press to start 1st recording.
䊳
When your name has already been recorded, select
Yes
or
No
for overwriting.
8.
After the 1st recording, press again to start the
2nd recording.
9.
To stop recording, wait for 12 seconds or press .
(It’s available for both 1st and 2nd recording.)
䊳
Select
Erase name
at step 5 above, and then select
Yes
to erase the recorded name.
Recording Custom Announcement
1.
Follow the above steps 1 and 2.
2.
Highlight
Custom
.
3.
Press .
4.
Highlight
Record
, and press .
5.
Press to start recording. You can record for 12
seconds.
䊳
When the announcement has already been recorded,
select
Yes
or
No
for overwriting.
6.
After the 1st recording, press again to start the
2nd recording.
7.
To stop recording, wait for 12 seconds or press .
(It’s available for both 1st and 2nd recording.)
Tip:
You should record
the announcement
twice because the
phone needs to
adjust to the base
station programs.
To Next Page
Loading...
