Getting To Know Your Sprint PCS Phone 19
Getting Started
2
Getting to Know
Your Phone
2
Understanding
Roaming
2
Getting Started
2
Getting Started
2
Installing the Battery
Your Sprint PCS Phone comes with a LiIon battery. Follow
these steps to install it:
1.
Place the battery into the space beneath the antenna
with the metal contacts at the bottom, facing
downward.
2.
Gently press down until it’s in place and the battery
release latch snaps.
Removing the Battery
To remove your battery for charging or for another reason,
follow these easy steps:
1.
Make sure the power is off so that you don’t lose any
stored numbers or messages.
2.
Press up on the battery release latch and hold the
battery, then pull it up and out at a 45-degree angle.
To Next Page
Loading...
