Sanyo SCP-6000 - Page 99

Section 10
92 Using Your Internal Phone Book
2.
Select the Internal Phone Book entry for which want to
set a speed dial number.
3.
Highlight the phone number you want to set a speed
dial.
4.
Press to display the menu options.
5.
Highlight
Set Speed Dial
, and press .
6.
To select a corresponding speed dial number from 2-9,
highlight an unassigned number and press .
OR
1.
From the Standby mode, press to display the
main menu.
2.
Highlight
Phone Book
, and press .
3.
Highlight
Speed Dial #s
, and press .
4.
To select a corresponding speed dial number from 2-9,
highlight an unassigned number and press .
5.
Highlight the entry from the list.
6.
Press .
7.
Select the phone number you want to set a speed dial;
press .
To use speed dial:
1.
From the Standby mode, press and hold the appropriate
key that corresponds to the memory location for
approximately two seconds.
OR
1.
From the Standby mode, press the appropriate key, and
then press .
䊳
The display confirms that the number has been dialed
when it shows
Connecting
.