Sanyo SPW-CR605GXH8 - I Operation Buttons; Simplified Remote Controller; RCS-KR1 AG

3
3 - 86
Control of Mini ECO-i SYSTEM
6. Simplified Remote Controller
Simplified Remote Controller / RCS-KR1AG
I Operation Buttons
A: ON/OFF operation
butto
n
B: MODE button
(AUTO)
(HEAT)
(DRY)
(COOL)
(F
AN)
C: Temperature setting
buttons
D: FAN SPEED selector
button
B: MODE button
E: FLAP button
C: Temperature setting
buttons
A: ON/OFF operation
button
G: Test button
F: Temperature Sensor
(Internal)
This button is for turning the air conditioner on and off.
Use this button to select one of the following five operating modes.
: Used to automatically set cooling or heating operation.
Only for single heat pump type
(Temperature range: 17 ~ 27 °C)
: Used for normal heating operation.
Only for heat pump type
(Temperature range: 16 ~ 26 °C)
: Used for dehumidifying without changing the room temperature.
(Temperature range: 18 ~ 30 °C)
: Used for normal cooling operation.
(Temperature range: 18 ~ 30 °C)
: Used to run the fan only, without heating or cooling operation.
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 86