3
3 - 89
Control of Mini ECO-i SYSTEM
6. Simplified Remote Controller
I Operation
STEP 3
STEP 2
S
TEP 5
NOTE To warm up the system, the power mains must be turned on at least five
(5) hours before operation.
STEP 1 To start the air conditioner
Press the ON/OFF operation button (
).
STEP 2 Setting the mode
Press the MODE button (
) to select the mode of your
choice.
[
(AUTO), (HEAT), (DRY), (COOL) or (FAN)]
STEP 3 Setting the fan speed
Press the FAN SPEED button (
) to select the fan speed of
your choice.
[
(AUTO), (HI.), (MED.) or (LO.)]
If AUTO is selected, the fan speed switches automatically.
STEP 4 Setting the t emperature
Use the
or but ton as appropriate to change the
temperature setting as desired.
(
reduces the temperature, and increases the
temperature.)
STEP 5 To stop the air conditioner
Press the ON/OFF operation button (
) again.
STEP 4
STEP 1
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 89
To Next Page
Loading...
