Sanyo SPW-CR605GXH8 - Canceling Timer Operation; How to Set the off Cycle Timer; How to Set the off Timer; How to Set the on Timer

3
3 - 31
Control of Mini ECO-i SYSTEM
3. Wired Remote Controller
How to set the OFF timer ( )
Example: Stopping the air conditioner after 3.5 hours of operation
Operation Indication
1. Press the ON/OFF button once to
start the air conditioner.
2. Press the TIMER SET button to
select the mode.
The and time
indications (hour) flash.
3.
Press the button until 3.5 is
displayed.
Press the button if the set time
is exceeded.
4. Press the SET button to set the
OFF timer.
How to set the OFF cycle timer ( )
Example: Always stopping the air conditioner after 3.5 hours of operation
Operation
1. Press the ON/OFF button to start the air conditioner.
2. Press the TIMER SET button twice to select the mode.
3. Set the time using the or button.
4. Press the SET button to set the OFF cycle timer ( ).
When the OFF cycle timer is set, the unit will always stop after 3.5 hours of
operation.
How to set the ON timer ( )
Example: Starting the air conditioner 10.5 hours after the ON time setting
Operation Indication
1. Press the ON/OFF button to start
the air conditioner.
2. Press the TIMER SET button to
select mode.
The and time
indications (hour) flash.
3.
Press the button until 10.5 is
displayed.
Press the button if the set time
is exceeded.
4. Press the SET button to set the ON
timer.
When the ON timer is set, the unit enters the paused state.
Canceling timer operation
Press the CL button to cancel operation. The time setting is canceled, and
the timer indicator no lon
g
er appears on the display.
NOTE
NOTE
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 31