3
3 - 73
Control of Mini ECO-i SYSTEM
5. Schedule Timer
I How to Set Holidays in a Scheduled Week of Operation
Operations programmed for a specific day during the week can be temporarily disabled by setting that day as a
holiday.
•
•
•
•
•
•
•
When the set holiday passes, the holiday setting is canceled and operation is resumed as programmed the
following week.
Holidays can be selected for the week starting from today’s day. If today is selected as a holiday, the holiday
setting is canceled from the next programmed operation. (Depending on the program, if the program is currently
running, the program may not stop.)
Example Setting
Today is Thursday and Friday
is set as a holiday.
When Friday comes, the
program set for that day does
not run.
When Saturday comes,
Friday’s holiday setting is
canceled.
STEP 1 Press the GROUP button to select a group to go on
holiday.
NOTE
Depending on installation conditions, group
selection is disabled or set so that all groups are
automatically selected for the holiday feature. If so,
proceed to the next step.
STEP 2 Press the HOLIDAY button.
“HL” starts blinking in the present time display area
and today’s day of the week starts blinking.
STEP 3 Select a day as the holiday using the DAY button,
and press the SET button.
A “ a” ppears over the selected holiday.
To select other holidays, select a day using the DAY
button and set it with the SET button.
If you made a mistake or want to cancel a holiday,
press the CLEAR button.
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 73
To Next Page
Loading...
