Sanyo VPC E1 - Xacti Camcorder - 6.0 MP User Manual

English 138
Shooting
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and press it
again.
58
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
77
When
recording a
video clip
under
fluorescent
lights, a
noticeable
flicker appears
in the image.
This occurs
when the
shutter speed
is too fast.
Set the ISO
sensitivity to
w or less.
77
Monitor
No playback
image
appears.
The playback
mode is not
active.
Press the
playback button
[=].
32
Viewing
images
The image is
too dark.
The flash was
blocked by a
finger or other
object.
Hold the
camera
correctly, and
make sure the
flash is not
obstructed.
28
The subject
was too far
away.
Capture the
image in the
range of
operation of the
flash.
145
Problem Cause Action
Reference
page

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Specifications

General

Brand	Sanyo
Model	VPC E1 - Xacti Camcorder - 6.0 MP
Category	Digital Camera
Language	English